China Standard Bevel Helical Gear Box for Ceramic Conveyor System synchromesh gearbox

Product Description

Bevel helical gearbox with Permanent magnet synchronous motor integrate variable frequency driver for conveyor

SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.

Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.

About Us

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Helical Bevel
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Single-Step
Samples:
US$ 569/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Minimizing Backlash and Ensuring Efficient Power Transfer in Bevel Gearboxes

Bevel gearboxes are meticulously designed to minimize backlash and optimize power transfer efficiency, ensuring smooth and precise motion in mechanical systems.

Several design considerations contribute to minimizing backlash and enhancing power transfer:

  • Tooth Profile and Quality: High-precision tooth profiles with minimal clearance between mating gears reduce backlash. The use of advanced manufacturing techniques ensures consistent gear quality and accurate tooth engagement.
  • Preload and Contact Pattern: Properly applied preload and optimized contact patterns between the bevel gear teeth enhance meshing accuracy, reducing the potential for backlash and improving load distribution.
  • Gearbox Rigidity: Stiff and rigid gearbox housing and components help maintain precise gear alignment, reducing the effects of deflection and misalignment that can lead to backlash.
  • Bearing Selection: High-quality bearings with minimal play contribute to reduced backlash and smoother motion by minimizing axial and radial movement of the gears.
  • Lubrication: Adequate lubrication reduces friction, wear, and vibration, promoting efficient power transfer and minimizing backlash-related issues.
  • Tolerances and Manufacturing Precision: Tight manufacturing tolerances and precision machining processes ensure consistent gear geometry, alignment, and positioning, minimizing any potential sources of backlash.

By incorporating these design principles and practices, bevel gearboxes are engineered to achieve tight backlash control and efficient power transmission. This makes them suitable for applications where precise motion control, accuracy, and reliability are crucial, such as robotics, aerospace, automotive, and industrial machinery.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China Standard Bevel Helical Gear Box for Ceramic Conveyor System   synchromesh gearbox	China Standard Bevel Helical Gear Box for Ceramic Conveyor System   synchromesh gearbox
editor by CX 2024-05-08